Categories
Advanced & Experimental Advanced Maya

Week 9 & 10: Loop Animation Comp in Nuke

In these two weeks, we could dedicate the lectures to polish and finish the loop animation and to ask all the questions we had about it.

After I finally got to render all layers, I put them on together on Nuke. I order to do the shadows, I duplicated the main model and projected it on a card perpendicular to the first main model. Then, I colour corrected, desaturated, and blurred this projection to match the shadows from the background. Following on, I thought that the neon ring if the dome looked too flat, so I decided to add some fake neon effect by adding glow, filter erode, and edge blur to create this diffused yellow light, and then duplicated this to create the interior white light of the neon (just desaturated the colour so it looks white). Since this neon half ring is supposed to be reflected in the metallic edge of the model platform, I also added some fake reflections a radial node that has been rotoscoped and graded accordingly (also added some edge blur and blur to soften core and edges of reflection). Moreover, the space texture from the inside dome was not too visible, so I rotoscoped the area where this texture is supposed to appear and added the texture manually instead of exporting it again. I also graded it so it did not show too much detail (that was the previous problem I tried to correct in Maya but for some reason it did not render as it was supposed to). Lastly, I also considered that the background look too flat, so I added some more pronounced shadows on the sides by rotoscoping the sides I wanted the shadows and adding some edge blur, blur, and grade to get the shadows colour.

Final comp without SFX

Since this was supposed to be an oddly satisfying loop animation, I also decided to include a relaxing background music to improve to the experience. The final looping videos were edited in After Effects.

Final Video with SFX

I enjoyed this project so much and I think I got more confident in my modelling and texturing skills with it. I also learnt the different ways to render a comp to then comp it by layers in Nuke, and After Effects, meaning that I do not need to finish everything in Maya, and I can take advantage of different programmes that are specialised on different aspects, to achieve better results. I also got more confident with node editing in Nuke as it has always been a bit challenging and intimidating for me, so I feel like this project has helped me expand my creative, technical, and project management skills in many areas.

Categories
Advanced & Experimental Advanced Nuke

Week 5: 3D Compositing Process in Nuke & Garage Homework WIP

This week, we learnt the 3D compositing process to put together plates and CG, to do clean-ups, to regrain, and to do a beauty rebuild with a multipass comp.

The 3D compositing general process looks like the following:

  • Main plate clean-up and roto work. After finishing the clean-up, it is recommended to render the cleaned plate so we can use this pre-rendered version to do the rest of the comp. This is done so Nuke has less nodes to calculate each time and the preview of the work done goes quicker.
  • CG compositing. In this part, we can move on with the beauty rebuild, adjusting the AOVs or passes with subtle grade and/or colour correction
    • Basic grade match. With a ‘grade’ node, we first do the white balance of the CG that we are going to integrate in the plate, measuring the ‘whitepoint’ (whitest part of the CG) and the ‘blackpoint’ (darkest part of the CG) while holding ‘ctrl+shift+alt’. Subsequently, we go to our background plate and measure ‘gain’ (for the whites) and the ‘lift’ (for the darks) while holding ‘ctrl+shift’. This will balance both plate and CG’s darks and shadows and will integrate them together.
    • Multipass comp. In this technique, we need first to ‘unpremult (all)’ our CG so we can start splitting the AOVs or passes. This split is made using ‘shuffle’ node and setting it to the desired pass we want to correct. Before editing the passes, we need to make sure to structure the nodes from the CG plate to a ‘copy’ node with all passes merged together, and double check that the CG plate looks exactly the same from initial point (original plate) to the ‘copy’ node. Sometimes this may look different as some of the passes could have been exported wrong. Once we split our passes we can proceed to ‘grade’ them individually. We ‘merge (plus)’ the light passes and we ‘merge (multiply)’ the shadows. We can also select an ID to create a colour map with ‘Keylight’ node. With this node we can select a specific area of the model that we want to adjust as its features will be separated in different saturated colour mattes. This way we could then re-texture a part of the model using a ‘ST-map’ node connected to the texture source. We can then re-light with ‘position pass’ and ‘normal pass’, followed by a ‘grade’ of the master CG plate. We can finish our beauty rebuild with a ‘copy (alpha-alpha)’ to copy the original alpha to the one created, and we we ‘premult’.
  • Motion Blur. Motion blur will add more realism and dynamism to the movement of the CG added as in 3D everything looks sharp and in focus so it is not as realistic. We can add motion blur following two methods:
    • Method 1: adding a ‘vector blur (rgba)’ node, then link it to ‘camera’, and adjust ‘motion amount’ in the ‘vector blur’ node as desired.
    • Method 2: ‘remove (keep)’ node linked to ‘motion blur 3d’ nodes, and adjust this last one’s ‘motion amount’ as desired.
  • Chroma aberration and defocus. We can add an ‘aberration’ node to match the original camera aberration of the live-footage plate, so we make the scene more credible. Also, with ‘defocus’ node we can add depth to the scene to be able to differentiate between sharp image and out of focus image (depth of field). After adjusting these, we need to add a ‘remove (keep)’ node connected to an ‘ST map’ node to put the original distortion back to the scene.
  • Regrain. We also could add some grain to the scene with ‘grain’ node. Then with ‘key mix (all)’ node linked to previous changes and ‘grain’, we can mix channels and add a mask to the previous changes made in the comp.
  • Effect card. We can add effects like smoke with a ‘card’ node. We will need to connect it to ‘shuffle (rgba to rgba with R to alpha)’ node to ‘card’, and ‘grade’ it. Then we ‘copy (alpha to alpha)’ and ‘premult’ to create the alpha of the effect and then we ‘defocus’. This will be projected on a ‘card’ (connected to ‘scene’, ‘scanline render’, and ‘camera’). Finally, we add the ‘ST map’ to unfreeze the frame and ‘multiply’ to show alpha created.
  • Lightwrap. We use this to add light to the edges, which could be adjusted with ‘diffuse’ and ‘intensity’. Then we will ‘merge (plus)’ as this is light feature.
  • QC. Using the ‘merge (difference)’ node, we can see and assess the changes made and there is any error. The ‘colour space’ node with the ‘output’ set as ‘HSV’ can be used to check the colours hue (R), saturation (G), and luminance (B) quality.
  • Final colour correction.
  • Export. The main preferred format to export our comp would be EXR. Some companies will also want a photo ‘JPEG’, or ‘AppleProRes’, or even ‘Avid DNxHD’, but that depends of the pipeline of each company.

The homework for this week was to start to put together the elements that would form part of our garage comp, and also, include the machine provided by the professor following all the steps we have learnt today.

Following the reference pictures we got with the brief, I started to research for 3D objects I could include such as tools, tyres, a table, etc.

I also decided to re-watch this week’s recording of the lecture to make sure I followed step by step the compositing process. This way, I started to understand the functionality of each node and technique, and to become more confident at the time of creating a whole comp by myself without having to look at references in other comps. The first thing I added was the machine in the back room. I did a beauty rebuilt with the separation of the passes and added a smoke effect with a card 3D projection. I feel like this part went really well as I did not have any issues along the process and the final look is pretty realistic.

Garage comp WIP with machine

After my back machine was fully set, I continued to add the 3D geometry to the comp with its textures. One problem that I had with the objects is the fact that they were really heavy and really jumpy when following the movement of the scene so it was hard to work with.

My work in progress comp looks like the following:

Garage comp WIP with 3D objects